Identifikasi Faktor Kegagalan Hasil Produksi Busa dengan Sistem Pakar Metode Dempster Shafer dan Certainty Factor | Jurnal Informatika Ekonomi Bisnis

Journal Content

Search

Search Scope

Browse

Information

Current Issue

Template
Similarity Checker

Member of

Statistics

Identifikasi Faktor Kegagalan Hasil Produksi Busa dengan Sistem Pakar Metode Dempster Shafer dan Certainty Factor

Dhyana Lowrenza Universitas Putra Indonesia YPTK Padang DOI: https://doi.org/10.37034/infeb.v4i1.105 Keywords: Failure Factor, Foam Production, Expert System, Dempster Shafer, Certainty Factor Abstract Foam is a derivative product made from PPG (Propylene Glycol) or Polyether Polyol which is then mixed with additives and catalysts. So it will produce foam that is used in the springbed and mattress industry. The foam is produced first by using a mixer machine. After the mixer, dispensing will be carried out (pouring the material into the mold) then the foam will be blown off and the foam production process is complete. Failure to produce foam often results in losses in terms of raw materials, costs, and time. To avoid the failure of the same foam production, a research was carried out by designing an expert system application that aims to be able to identify the factors causing the failure of foam production and to reduce the risk of failure of foam production. The data needed in this study were obtained from PT Bungo Permai Lestari. The data is then processed using the Dempster Shafer method and the Certainty Factor method. The results of this study are to provide output in the form of certainty values from failure of foam production, factors causing failure of foam production, as well as solutions to failure of foam production obtained through consultation using the Dempster Shafer method and the Certainty Factor method by selecting symptoms that match the results. foam production. So this research can help PT Bungo Permai Lestari to find out the causes and solutions to the failure of foam production and can reduce the risk of failure during foam production. Downloads Download data is not yet available. References [1] Djunaidi, M., Sholeh, M. A. A., & Mufiid, N. M. (2018). Identifikasi Faktor Penerapan Green Supply Chain Management Pada Industri Furniture Kayu. Jurnal Teknik Industri, 19(1), 1. doi:10.22219/jtiumm.vol19.no1.1-10 [2] Ambri, D. D., & Suaryana, I. G. N. A. (2018). Pertumbuhan Perusahaan Sebagai Pemoderasi Pengaruh Leverage pada Nilai Perusahaan. E-Jurnal Akuntansi, 1258. doi:10.24843/eja.2018.v25.i02.p17 [3] Sunardi, N. (2019). Mekanisme Good Corporate Governance Terhadap Nilai Perusahaan dengan Leverage Sebagai Variabel Intervening Pada Perusahaan Manufaktur Yang Terdaftar Di Bursa Efek Indonesia Tahun 2012-2018. JIMF (Jurnal Ilmiah Manajemen Forkamma), 2(2). doi:10.32493/frkm.v2i2.3002 [4] Rahman, F. (2017). Peran Modal Manusia dan Modal Investasi Terhadap Nilai Produksi Industri Kecil Di Kota Pekanbaru. Jurnal Benefita, 2(1), 1. doi:10.22216/jbe.v2i1.379 [5] Kesuma, M., Fitria, D., & Albab Al Umar, A. U. (2021). Pengaruh Harga, Kualitas Produk, dan Promosi Terhadap Keputusan Pembelian Produk Pattaya Corner Kota Salatiga. Jurnal Ilmiah Manajemen Ubhara, 3(1), 13. doi:10.31599/jmu.v3i1.845 [6] Saputra Nasution, T. I., & Kurniawati, T. (2019). Pengaruh Kualitas Produk dan Kualitas Pelayanan Terhadap Kepuasan Konsumen Produk Nissan Grand Livina. Jurnal Ecogen, 1(4), 880. doi:10.24036/jmpe.v1i4.5667 [7] Matswaya, A., Sunarko, B., Widuri, R., & Indriati, S. (2019). Analisis Perencanaan Kapasitas Produksi dengan Metode Rought Cut Capacity Planning (RCCP) Pada Pembuatan Produk Kasur Busa (Studi pada PT Buana Spring Foam Di Purwokerto). Performance, 26(2), 128. doi:10.20884/1.jp.2019.26.2.1624 [8] Gunawan, E., Wahyudi, J., & Sari, Y. (2021). Pendekatan Berbasis Kecerdasan Buatan Dengan Metode Naïve Bayes untuk Website Baznas. Jurnal Teknologi Informasi Universitas Lambung Mangkurat (JTIULM), 6(1), 1–8. doi:10.20527/jtiulm.v6i1.68 [9] Nawi, A., Yaakob, M. F. M., Hussin, Z., Muhaiyuddin, N. D. M., Samuri, M. A. A., & Tamuri, A. H. (2021). Keperluan Garis Panduan dan Etika Islam Dalam Penyelidikan Kecerdasan Buatan. Journal of Fatwa Management and Research, 26(2), 280–297. doi:10.33102/jfatwa.vol26no2.414 [10] Sugiharni, G. A. D., & Divayana, D. G. H. (2017). Pemanfaatan Metode Forward Chaining Dalam Pengembangan Sistem Pakar Pendiagnosa Kerusakan Televisi Berwarna. Jurnal Nasional Pendidikan Teknik Informatika (JANAPATI), 6(1), 20. doi:10.23887/janapati.v6i1.9926 [11] Wardani, S. Y. C., Maulana, A., Fauzi, A., & Fahrizal, F. (2021). Sistem Pakar Pendeteksi Kerusakan Pada Hardware Komputer Berbasis Android. Format : Jurnal Ilmiah Teknik Informatika, 10(1), 1. doi:10.22441/format.2021.v10.i1.001 [12] Widayanto, A., Pratmanto, D., & Musyaffa, S. T. (2018). Sistem Pakar Diagnosa Kerusakan Kamera DSLR Berbasis Android. Evolusi : Jurnal Sains Dan Manajemen, 6(1). doi:10.31294/evolusi.v6i1.3542 [13] Br Sembiring, N. S., & Sinaga, M. D. (2018). Penerapan Metode Dempster Shafer untuk Mendiagnosa Penyakit Dari Akibat Bakteri Treponema Pallidum. CSRID (Computer Science Research and Its Development Journal), 9(3), 134. doi:10.22303/csrid.9.3.2017.134-143 [14] Yunitasari, Y., Voutama, A., & Sulistiyowati, N. (2021). Perbandingan Metode Certainty Factor dan Dempster Shafer untuk Sistem Pakar Depresi Pasca Melahirkan. Techno.Com, 20(3), 362–371. doi:10.33633/tc.v20i3.4905 [15] Rahmanita, E., Agustiono, W., & Juliyanti, R. (2019). Sistem Pakar Diagnosa Penyakit Saluran Pencernaan Dengan Perbandingan Metode Forward Chaining dan Dempster Shafer. Jurnal Simantec, 7(2), 82–89. doi:10.21107/simantec.v7i2.6743 [16] Eska, J., Hidayatullah, H., & Hambali, H. (2021). Sistem Pakar Metode Certainty Factor Dalam Diagnosa Penyakit Kanker Kelenjar Getah Bening Pada Rsud H. Abdul Manan Simatupang. Journal of science and social research, 4(2), 155. doi:10.54314/jssr.v4i2.548 [17] Rachman, R., & Mukminin, A. (2018). Penerapan Metode Certainty Factor Pada Sistem Pakar Penentuan Minat dan Bakat Siswa SD. Khazanah Informatika: Jurnal Ilmu Komputer dan Informatika, 4(2), 90. doi:10.23917/khif.v4i2.6828 [18] Sihotang, H. T. (2019). Sistem Pakar Mendiagnosa Penyakit Kolesterol Pada Remaja Dengan Metode Certainty Factor (CF) Berbasis Web. doi:10.31227/osf.io/97rz8 [19] Hormati, R., Yusuf, S., & Abdurahman, M. (2021). Sistem informasi Data Poin Pelanggaran Siswa Menggunakan Metode Prototyping Berbasis Web Pada SMA Negeri 10 Kota. Jurnal Ilmiah ILKOMINFO - Ilmu Komputer & Informatika, 4(2). doi:10.47324/ilkominfo.v4i2.128 [20] Ramadan, R. (2020). Penerapan Konsep Model View Controller Pada Sistem Informasi Manajemen Data Terintegrasi. Information Management For Educators and Professionals : Journal of Information Management, 5(1), 45. doi:10.51211/imbi.v5i1.1412	DOWNLOAD Published 2022-02-07 Issue Vol. 4, No. 1 (March 2022) Section Articles How to Cite Lowrenza, D. (2022). Identifikasi Faktor Kegagalan Hasil Produksi Busa dengan Sistem Pakar Metode Dempster Shafer dan Certainty Factor. Jurnal Informatika Ekonomi Bisnis, 4(1), 7-16. https://doi.org/10.37034/infeb.v4i1.105 ACM ACS APA ABNT Chicago Harvard IEEE MLA Turabian Vancouver Download Citation Endnote/Zotero/Mendeley (RIS) BibTeX This work is licensed under a Creative Commons Attribution 4.0 International License.

Indexing and Abstractions:

Published:

This work is licensed under a Creative Commons Attribution 4.0 International Public License (CC BY 4.0).

Web Analytics Made Easy -
StatCounter